- Product description
-
Product description
The Ion charging station for the charging of electrical vehicles in private areas as a singular charging point. Suitable for permanent mounting on the wall in interior or protected exterior areas.
• Charging according to Mode 3 in accordance with IEC 61851-1
• Single, double and three-phase charging
• Suitable for TN and TT networks
• Integrated temperature monitoring
• DC error current monitoring
• Status information via LED display
• Prewired, ready for connection
• Including 5 m charging cable with type 2 charging connector and cable bracket
• Supply from above or below
• Stainless steel design elements
• Charging power can be limited to a fixed value, factory-set value 11 kW
• Modbus RTU protocol via RS-485 interface for bidirectional communication
• Can be controlled via Modbus RTU for dynamic load management, dynamic PV-optimised charging and digital authentication (via web/app) with external control (ASKI, Smart1Solutions, Loxone, Comexio)
• Potential-free enable contact, e.g. for PV systems, ripple control receiver
-
- Technical data
-
Technical data
Colour Black Depth 127 mm Dimension 330x300x127 IFTTT support no Material Polycarbonate Max. Output per charging point 22 kW Nominal connection output 22 kW Number of charging points 1 Number of type 2 charging connectors 1 Protection rating IP66 Protection rating IK code IK08 Surface Painted Surge protection no Version for 3-phase With circuit breaker no With communication interface yes With domestic junction box (HAK) no With energy meter no With load management no Dimensions
Height 330 mm Width 300 mm - All types
- Downloads
-
Data sheet WB AC BL / 6570020 , 0.28MB , pdfDeclaration of conformity WB AC BL / 6570020 , 0.24MB , pdfMounting instructions Ion charging station , 4.61MB , pdfOperating instructions Ion charging station , 2.38MB , pdf
Ukraine - English